Bathroom Vanity Cabinet with Two Drawers in Walnut

Description

Our floating vanity is handmade in our Portland shop from the highest quality hardwood veneer. We use 3/4” stock with a sturdy 1/2” back panel which is easily cut for plumbing at the time of install. The face frame is solid hardwood with edge banded veneer drawer fronts.

Ships fully assembled and ready for install.

Designed for a single sink with integrated or separate vanity top. Undermount sinks will require the top drawer to be non-operational. Contact us if you’re unsure.

5 available sizes are designed to leave small overhang front and sides, usually about 1/2 inch from standard sized vanity tops (sold separately) Please contact us if you need a custom size.

Drawers are solid Maple with dovetail joinery hung on soft-close under-mount premium slides.
Standard plumbing cutout can be modified for your unique set-up if needed. See images for standard cut-out. Top drawer is shorter to allow for integrated counter/sink combos.

Hardwood French mounting cleat system requires wall-stud connection. If possible, have your contractor add support blocking between the studs for easier installation. All necessary install hardware and detailed directions included

Vanities are finished with low VOC Hard Wax Oil for a durable, water-resistant satin sheen. We do not use stain— only clear oil for a natural color. Variations in color and grain should be expected from real wood.

Dimensions;
Width = Choose 23.5, 29.5, 35.5, 41.5 or 47.5 inches
Height = 20 inches
Depth = 21.5 inches

Professional install recommended.

*Sink and faucet NOT INCLUDED– Cabinet only

Handmade in Maine